• page_head_bg

High performance PA46-GF, FR widely used on various auto parts

Short Description:

Material plastic PA46 30%-50% GF reinforced, high strength, high flow, high heat stablity, long term use temperature more than 150 degree, HDT more than 200 degree,low water absorption, demensional stability, low warpage, Wear and friction improvement, heat welding resistant.


Product Detail

Product Tags

Nylon 46 (nylon 4-6, nylon 4/6 or nylon 4,6, PA46, Polyamide 46) is a high heat resistant polyamide or nylon. DSM is the only commercial supplier of this resin, which markets under the trade name Stanly. Nylon 46 is an aliphatic polyamide formed by the polycondensation of two monomers, one containing 4 carbon atoms, 1,4-diaminobutane (putrescine), and the other 6 carbon atoms, adipic acid, which give nylon 46 its name. It has a higher melting point than nylon 6 or nylon 66 and mainly used in applications which must withstand high temperatures.

Nylon 46 withstands high loads and stresses at high temperatures and exposure to aggressive environments, and is therefore suitable for under-the-bonnet applications. Typical applications are to be found in the engine and transmission, engine-management, air-inlet, brake, air cooling and electronic systems. Many automotive components have also been produced in nylon 46, because of its excellent creep resistance, toughness and good wear characteristics. As a result of its intrinsic properties nylon 46 has been successfully applied in the following applications and electronics and electrical end-markets.

PA46 Main Application Field

Field

Description 

Electronic and Electrical

SMD components, connectors, circuit breakers, winding components, electric motor components and electrical components

 auto parts

Sensors and connectors

SIKO PA46 Grades And Description

SIKO Grade No.

Filler(%)

FR(UL-94)

Description 

SP46A99G30HS

30%, 40%,

50%

HB

30%-50% GF reinforced, High strength, high flow, high heat stablity, Long-term use temperature more than 150 degree, HDT more than 200 degree,low water absorption, demensional stability, low warpage, Wear and friction improvement, heat welding resistant.

SP46A99G30FHS

V0

Grade Equivalent List

Material

Specification

SIKO grade

Equivalent to Typical brand & grade

PA46

PA46+30%GF, Lubricated, Heat stabilized

SP46A99G30-HSL

DSM Stanyl TW241F6

PA46+30%GF, FR V0, Heat stabilized

SP46A99G30F-HSL

DSM Stanyl TE250F6

PA46+PTFE+30%GF, Lubricated, Heat stabilized, Wear resistant, Anti-friction

SP46A99G30TE

DSM Stanyl TW271F6


  • Previous:
  • Next:

  •