• page_head_bg

Manufacturer for Polyamide 66 Resin - Injection grade modified PPS- GF, MF, FR for auto lamp reflectors – Siko

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

Sticking for the belief of "Creating items of top of the range and creating buddies with people today from all over the world", we normally put the interest of shoppers in the first place for Pla Cups Compostable, Pa6 25 Gf, Pc/Abs V0, Many years of work experience, we have realized the importance of providing good quality products and the best before-sales and after-sales services.
Manufacturer for Polyamide 66 Resin - Injection grade modified PPS- GF, MF, FR for auto lamp reflectors – Siko Detail:

Polyphenylene sulfide is an engineering plastic, commonly used today as a high-performance thermoplastic. PPS can be molded, extruded, or machined to tight tolerances. In its pure solid form, it may be opaque white to light tan in color. Maximum service temperature is 218 °C (424 °F). PPS has not been found to dissolve in any solvent at temperatures below approximately 200 °C (392 °F).

Polyphenylene sulfide (PPS) is an organic polymer consisting of aromatic rings linked by sulfides. Synthetic fiber and textiles derived from this polymer resist chemical and thermal attack. PPS is used in filter fabric for coal boilers, papermaking felts, electrical insulation, film capacitors, specialty membranes, gaskets, and pickings. PPS is the precursor to a conductive polymer of the semi-flexible rod polymer family. The PPS, which is otherwise insulating, can be converted to the semiconducting form by oxidation or use of dopants.

PPS is one of the most important high temperature thermoplastic polymers because it exhibits a number of desirable properties. These properties include resistance to heat, acids, alkalis, mildew, bleaches, aging, sunlight, and abrasion. It absorbs only small amounts of solvents and resists dyeing.

PPS Features

Excellent heat resistance, continuous use temperature up to 220-240 ° C, glass fiber reinforced heat distortion temperature above 260 ° C
Good flame retardant and can be UL94-V0 and 5-VA (no dripping) without adding any flame retardant additives.
Excellent chemical resistance, only second to PTFE, almost insoluble in any organic solvent
PPS resin is highly reinforced by glass fiber or carbon fiber and has high mechanical strength, rigidity and creep resistance. It can replace part of metal as structural material.
The resin has excellent dimensional stability.
Extremly small molding shrinkage rate, and low water absorption rate. It can be used under high temperature or high humidity conditions.
Good fluidity. It can be injection molded into complex and thin-walled parts.

PPS Main Application Field

Widely used in machinery, instrumentation, automotive parts, electrical and electronic, railway, home appliances, communications, textile machinery, sports and leisure products, oil pipes, fuel tanks and some precision engineering products.

Field

Application Cases

Automotive Cross connector, brake piston, brake sensor, lamp bracket, etc
Household Appliances Hairpin and its heat insulation piece, electric razor blade head, air blower nozzle, meat grinder cutter head, CD player laser head structural parts
Machinery Water pump, oil pump accessories, impeller, bearing, gear, etc
Electronics Connectors, electrical accessories, relays, copier gears, card slots, etc

p-2-1
p-2-2
p-2-3
p-2-4
p-2-5

Grade Equivalent List

Widely used in machinery, instrumentation, automotive parts, electrical and electronic, railway, home appliances, communications, textile machinery, sports and leisure products, oil pipes, fuel tanks and some precision engineering products.

Material

Specification

SIKO grade

Equivalent to Typical brand & grade

PPS

PPS+40%GF

SPS90G40

Phillips R-4, Polyplastics 1140A6, Toray  A504X90,

PPS+70% GF and Mineral filler

SPS90GM70

Phillips R-7, Polyplastics 6165A6, Toray  A410MX07


Product detail pictures:

Manufacturer for Polyamide 66 Resin - Injection grade modified PPS- GF, MF, FR for auto lamp reflectors  – Siko detail pictures

Manufacturer for Polyamide 66 Resin - Injection grade modified PPS- GF, MF, FR for auto lamp reflectors  – Siko detail pictures

Manufacturer for Polyamide 66 Resin - Injection grade modified PPS- GF, MF, FR for auto lamp reflectors  – Siko detail pictures

Manufacturer for Polyamide 66 Resin - Injection grade modified PPS- GF, MF, FR for auto lamp reflectors  – Siko detail pictures

Manufacturer for Polyamide 66 Resin - Injection grade modified PPS- GF, MF, FR for auto lamp reflectors  – Siko detail pictures

Manufacturer for Polyamide 66 Resin - Injection grade modified PPS- GF, MF, FR for auto lamp reflectors  – Siko detail pictures


Related Product Guide:

We thinks what customers think, the urgency of urgency to act during the interests of a purchaser position of theory, allowing for much better good quality, lower processing costs, prices are extra reasonable, won the new and old buyers the support and affirmation for Manufacturer for Polyamide 66 Resin - Injection grade modified PPS- GF, MF, FR for auto lamp reflectors – Siko , The product will supply to all over the world, such as: Swiss, Denver, panama, We have a good reputation for stable quality products, well received by customers at home and abroad. Our company would be guided by the idea of "Standing in Domestic Markets, Walking into International Markets". We sincerely hope that we could do business with customers both at home and abroad. We expect sincere cooperation and common development!
  • This company has the idea of "better quality, lower processing costs, prices are more reasonable", so they have competitive product quality and price, that's the main reason we chose to cooperate.
    5 Stars By Caroline from moldova - 2017.01.11 17:15
    The factory can meet continuously developing economic and market needs, so that their products are widely recognized and trusted, and that's why we chose this company.
    5 Stars By Honorio from Malawi - 2017.03.07 13:42